L'Oreal Elvive Hyaluron Plump shampoo is marketed as a hydrating hair care product designed to infuse hair with moisture, leaving it soft, silky, and revitalized. The shampoo's formula boasts hyaluronic acid as a key ingredient, promising to coat the cuticles and nourish hair for up to 72 hours. To truly understand the product's potential benefits and drawbacks, a comprehensive analysis of its ingredients is essential. This article provides a detailed breakdown of each component, exploring its function, potential benefits, and possible concerns.
The ingredient list of L'Oreal Elvive Hyaluron Plump shampoo is extensive, encompassing cleansing agents, moisturizing compounds, preservatives, and additives that contribute to the product's overall performance and sensory experience.
Water (Aqua/Water/Eau): As the most abundant ingredient in most cosmetic formulations, water serves as the primary solvent in the shampoo. It provides a base for dissolving and blending other ingredients, ensuring a smooth and consistent texture. The water used in cosmetics is purified and deionized to remove mineral ions.
Sodium Laureth Sulfate (SLES): SLES is a surfactant, a cleansing agent responsible for creating foam and removing dirt and oil from the hair and scalp. It is created from palm kernel oil or coconut oil. SLES is milder and less likely to irritate than sodium lauryl sulfate. The SLES molecule has a bigger water-soluble head part that makes it milder and much less irritating.
Sodium Lauryl Sulfate (SLS): SLS is another surfactant with strong cleansing and foam-generating properties. The surfactant property make it a great foam creator and cleansing agent. Surfactants help bind ingredients that normally do not mix. It's often confused with sodium lauryl sulfate (SLS), but they are absolutely not the same.
Read also: Is L'Oreal EverPure Volume Shampoo Worth It?
Cocamidopropyl Betaine: Derived from coconut oil, cocamidopropyl betaine is a surfactant and cleanser that aids in removing impurities from the hair and scalp. It also functions as a foam stabilizer and viscosity enhancer, contributing to the shampoo's creamy texture. It’s mild and works very well combined with other cleansing agents and surfactants. The art of cleansing is usually to balance between properly cleansing but not over-cleansing and cocamidopropyl betaine is helpful in pulling off this balance right.
Sodium Chloride: Commonly known as salt, sodium chloride acts as a thickener in surfactant-based cleansing formulas. It helps to create a gel-like consistency, enhancing the product's texture and ease of application. It also works as an emulsion stabilizer in water-in-oil emulsions, that is when water droplets are dispersed in the outer oil (or silicone) phase.
Glycol Distearate: This ingredient functions as a pearlizing or opacifying agent, imparting a pearly, glossy appearance to the shampoo. It contributes to the product's aesthetic appeal. A so-called diester created from two stearic acid molecules and an ethylene glycol molecule. Its main thing is being an opacifier and pearling agent in cleansing products making them white and glossy.
Hexylene Glycol: Hexylene glycol is a surfactant and emulsifier. As a surfactant, Hexylene Glycol helps gather dirt and oil on your skin to be washed away. As an emulsifier, Hexylene Glycol helps keep water and oil together. This prevents them from separating in a product. Hexylene Glycol also thins out the texture of a product by lessening viscosity. Hexylene Glycol has a small molecular weight.
Parfum/Fragrance: Parfum is a catch-all term for an ingredient or more that is used to give a scent to products. Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture. Depending on the blend, the ingredients in the mixture can cause allergies and sensitivities on the skin. Some ingredients that are known EU allergens include linalool and citronellol. Parfum can also be used to mask or cover an unpleasant scent.
Read also: Metal Detox Shampoo: Ingredients and Benefits
Cocamide MEA: Chemically speaking, it is the little sister of Cocamide DEA and has similar properties to that guy.
Citric Acid: Citric acid is an AHA derived from citrus fruits (think oranges, lemons, and limes!). As an AHA, Citric Acid removes the top layer of skin cells from the newer layer of skin underneath.
Sodium Benzoate: Sodium benzoate is a preservative that inhibits the growth of mold and bacteria, extending the shelf life of the shampoo. It is typically produced synthetically. The US FDA and EU Health Committee have approved the use of sodium benzoate. Sodium benzoate works as a preservative by inhibiting the growth of bacteria inside of cells. It prevents the cell from fermenting a type of sugar using an enzyme called phosphofructokinase. It is the salt of benzoic acid.
Sodium Hydroxide: Also known as lye or caustic soda, sodium hydroxide is used to adjust the pH of the product. In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.
Dimethicone: Dimethicone is a silicone that imparts a smooth, silky feel to the hair. It forms a protective barrier, reducing frizz and enhancing shine. It makes the skin silky smooth, creates a subtle gloss and forms a protective barrier (aka occlusive). Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice).
Read also: Dream Lengths: Does it work?
Carbomer: Carbomer is a polymer of acrylic acid. Its main role is to create a gel consistency. A high amount of carbomer can cause pilling or balling up of products.
Coco-Betaine: Coco-Betaine is the natural version of Cocamidopropyl Betaine. It is often derived from coconuts. Coco-Betaine is a surfactant, meaning it helps remove dirt and oil from the skin.
Salicylic Acid: Salicylic Acid (also known as beta hydroxy acid or BHA) is a well-known ingredient for treating skin that struggles with acne and clogged pores. It exfoliates both the skin's surface and deep within the pores to help clear out buildup, control oil, and reduce inflammation. Unlike AHAs (alpha hydroxy acids), salicylic acid is oil-soluble. This allows it to penetrate into pores which makes it especially effective for treating blackheads and preventing future breakouts.
Guar Hydroxypropyltrimonium Chloride: We don't have description for this ingredient yet.
Amodimethicone: A modified dimethicone-type silicone molecule that also contains amino-groups. Having amino-groups means that Amodimethicone also has Nitrogen in its molecule that likes to have a positive charge. Positively charged (or quaternised) molecules are substantive to skin and hair as those are negatively charged surfaces and are excellent film formers.
Trideceth-10: We don't have description for this ingredient yet.
PEG-100 Stearate: Peg-100 Stearate is an emollient and emulsifier. As an emollient, it helps keep skin soft by trapping moisture in. On the other hand, emulsifiers help prevent oil and water from separating in a product. There are 100 ethylene oxide monomers in Peg-100 Stearate.
Stareth-6: We don't have description for this ingredient yet.
Sodium Hyaluronate: Sodium Hyaluronate is hyaluronic acid's salt form. It is commonly derived from the sodium salt of hyaluronic acid. Like hyaluronic acid, it is great at holding water and acts as a humectant. As far as skincare goes, sodium hyaluronate and hyaluronic acid are pretty much the same and the two names are used interchangeably.
Phenoxyethanol: Phenoxyethanol is a preservative that has germicide, antimicrobial, and aromatic properties. Studies show that phenoxyethanol can prevent microbial growth. By itself, it has a scent that is similar to that of a rose. It's often used in formulations along with Caprylyl Glycol to preserve the shelf life of products.
Limonene: Limonene is a fragrance that adds scent and taste to a formulation. It's found in the peel oil of citrus fruits and other plants such as lavender and eucalyptus. Limonene acts as an antioxidant, meaning it helps neutralize free radicals. When exposed to air, oxidized limonene may sensitize the skin. Because of this, limonene is often avoided by people with sensitive skin.
Trideceth-3: We don't have description for this ingredient yet.
Fumaric Acid: We don't have description for this ingredient yet.
Acetic Acid: Acetic Acid is created during the process of fermenting ethanol. The pH of your skin is important to maintaining a healthy barrier. This barrier keeps your skin hydrated and protects your skin from external factors such as bacteria.
CI 60730/Ext. Violet 2: Ci 60730/Ext.
tags: #L'Oreal #Elvive #Hyaluron #Plump #shampoo #ingredients
